China Standard Electric Golf Cart, Low CZPT Consumption Sightseeing Car, Small Volume, Flexible Operation, Comfortable and Beautiful High Sensitivity Small Car with Good quality

Solution Description

SUNTAE-MOKO  Electric powered Sightseeing Car    
Initial, it is electrical automobile, and astonishingly it can be utilized for sightseeing, golf use, taking pleasure in sunshine! 
one. About normal specification:      


two. Please send out your utilization qualifications to get technological consultation from our technical office.

You should see movies of test and software at our motor branch 
EIFPMG youtube channel  

About SUNTAE Electric Car Creation Line:

Major dimensions
two.2.1. Size: 2930 mm 2.2.2. Width: 1520 mm 2.2.3. Height: 1550 mm 2.2.4. Wheelbase: 2100 mm Wheelbase sidecar: N.A. 2.2.5. Monitor width Monitor width front: 1250 mm Track width rear: 1350 mm Observe width sidecar: N.A. Floor clearance between the axles: N.A. 2.2.fifteen. Wheelbase to floor clearance ratio: N.A. 2.2.17 Seat height: N.A.
two.1.1. Mass in operating order: 433 kg 2.1.2. Genuine mass: 844 kg 2.1.3. Technically permissible maximum laden mass: 1039 kg Technically permissible highest mass on front axle: 515 kg Technically permissible optimum mass on rear axle: 524 kg Technically permissible optimum mass on sidecar axle: N.A. 2.1.7. Technically permissible maximum towable mass: Braked: N.A. Unbraked: N.A. Technically permissible optimum laden mass of the combination: N.A. Technically permissible maximum mass at the coupling position: N.A.

.1. Make (trade title of the manufacturer): MOKE, E-MOKE
.2. Variety: JC07-A (CV * Sort): N.A
.2.1. Variant: 00 (CV * Variant): N.A
.2.2. Variation: 00 (CV * Edition): N.A.
.2.3. Business identify (if obtainable): JC07 (CV * Professional identify (if obtainable)): N.A
.3. Category, subcategory and sub-subcategory of motor vehicle: L7e-CP (CV * Classification, subcategory and sub-subcategory of motor vehicle): N.A.
.4. Firm name and deal with of producer: JHC New Strength Vehicle Hong Kong Co., Minimal Area 1501(203), 15/F, SPA Centre, 53-55 Lockhart Street, Wanchai, Hong Kong
.4.2. Name and handle of manufacturer’s licensed representative (if any): BURBYS 591 Rue Benoit Mulsant 69400 Villefranche Sur Saone
.5.1. Place of the manufacturer’s statutory plate(s): L, x one hundred sixty, y 330, z 730
.5.2. Strategy of attachment of the manufacturer’s statutory plate(s): By riveted
.6. Spot of the vehicle identification variety: R, x one hundred sixty, y 330, z 730
one. Vehicle identification quantity: ☆R1AFJZZ0XJJ000008☆
Standard construction qualities
1.3. Variety of axles: 2 and wheels: 4
one.3.1. Axles with twinned wheels: N.A.
one.3.2. Powered axles: F
6.2.4. Innovative braking technique: Stomach muscles / CBS / Equally Ab muscles and CBS / None:

conforms in all respects to the sort explained in EU type-acceptance e9*168/2013*11202*00 (sort-acceptance variety including extension variety) (CV*: N.A. kind-acceptance quantity which includes extension number) issued on XX, XX, XXXX (date of situation) (CV*: N.A. day of concern) and can be forever registered in Member States possessing appropriate/remaining-hand site visitors and making use of metric/imperial models for the speedometer.
What we will do for you:                        
1. offer technological advisor before order and validate your true specialized prerequisite according to your description on use inside 1-3 functioning days                        
2. provide the correct and accredited below severe good quality inspection system within 10 days(if customized product,we will recheck the supply time)                        
3. provide specialized assistance when the item comes you, to make certain you can operate it efficiently in real field               
four. supply 1 year guarantee, and entire life technical support                        
5. often update our product data with you.       

Welcome to Pay a visit to us for More Conversing on Approach Cooperation on any EV relevant initiatives:

Please adhere to us at web site, , and youtube channel and develop automation and EV apps up together!


How to Identify a Faulty Travel Shaft

The most widespread troubles related with automotive driveshafts contain clicking and rubbing noises. While driving, the noise from the driver’s seat is often obvious. An seasoned automobile mechanic can very easily discover no matter whether the sound is coming from the two sides or from one particular side. If you recognize any of these signs, it’s time to send your auto in for a correct analysis. This is a manual to determining if your car’s driveshaft is defective:

Symptoms of Driveshaft Failure

If you’re having difficulties turning your vehicle, it is time to examine your vehicle’s driveshaft. A poor driveshaft can restrict the total handle of your automobile, and you need to repair it as quickly as attainable to stay away from even more issues. Other signs and symptoms of a propshaft failure consist of odd noises from underneath the motor vehicle and issues shifting gears. Squeaking from beneath the motor vehicle is an additional sign of a faulty driveshaft.
If your driveshaft fails, your automobile will quit. Though the motor will nonetheless run, the wheels will not change. You could listen to unusual noises from under the car, but this is a rare symptom of a propshaft failure. Nonetheless, you will have loads of time to resolve the issue. If you don’t hear any noise, the problem is not affecting your vehicle’s potential to transfer.
The most obvious indicators of a driveshaft failure are uninteresting sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is very likely to harm the transmission. It will need a trailer to eliminate it from your car. Apart from that, it can also affect your car’s functionality and require repairs. So if you listen to these indicators in your car, be positive to have it checked by a mechanic right absent.

Drive shaft assembly

When designing a propshaft, the design and style should be primarily based on the torque necessary to travel the automobile. When this torque is too large, it can result in irreversible failure of the push shaft. Therefore, a good push shaft style ought to have a extended provider daily life. Here are some guidelines to aid you style a excellent driveshaft. Some of the major components of the driveshaft are detailed beneath.
Snap Ring: The snap ring is a detachable element that secures the bearing cup assembly in the yoke cross gap. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined component with a series of ridges that match into the grooves of the mating piece. The bearing cup assembly is composed of a shaft and conclude fittings.
U-joint: U-joint is necessary due to the angular displacement in between the T-shaped housing and the pinion. This angle is specially big in lifted 4x4s. The style of the U-joint have to assure a constant rotational pace. Proper driveshaft style need to account for the distinction in angular velocity among the shafts. The T-bracket and output shaft are hooked up to the bearing caps at equally ends.


Your motor vehicle has a established of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it by yourself. You will need to have a hammer, ratchet and socket. In get to eliminate the U-joint, you must first remove the bearing cup. In some circumstances you will require to use a hammer to take away the bearing cup, you should be careful as you will not want to damage the drive shaft. If you cannot eliminate the bearing cup, you can also use a vise to press it out.
There are two sorts of U-joints. One is held by a yoke and the other is held by a c-clamp. A total ring is safer and excellent for vehicles that are typically employed off-street. In some cases, a entire circle can be utilised to mend a c-clamp u-joint.
In addition to too much torque, extreme masses and incorrect lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be broken if the motor is modified. If you are driving a motor vehicle with a greatly modified motor, it is not sufficient to change the OE U-joint. In this scenario, it is essential to get the time to correctly lubricate these components as needed to hold them functional.

tube yoke

QU40866 Tube Yoke is a typical substitution for destroyed or ruined driveshaft tubes. They are desirably created of a metallic substance, this kind of as an aluminum alloy, and contain a hollow portion with a lug framework at one end. Tube yokes can be made employing a range of strategies, including casting and forging. A widespread approach includes drawing reliable factors and machining them into the closing condition. The ensuing components are significantly less costly to make, especially when compared to other varieties.
The tube fork has a link point to the driveshaft tube. The lug structure offers attachment details for the gimbal. Usually, the driveshaft tube is 5 inches in diameter and the lug construction is 4 inches in diameter. The lug framework also serves as a mounting level for the push shaft. As soon as set up, Tube Yoke is easy to maintain. There are two types of lug constructions: 1 is forged tube yoke and the other is welded.
Hefty-responsibility series drive shafts use bearing plates to protected the yoke to the U-joint. All other dimensions are secured with exterior snap rings. Yokes are normally machined to settle for U-bolts. For some apps, grease fittings are utilised. This attachment is far more suited for off-street autos and functionality autos.

end yoke

The end yoke of the push shaft is an integral part of the travel practice. Selecting a higher-good quality end yoke will help ensure lengthy-phrase procedure and avoid premature failure. Pat’s Driveline gives a complete line of automotive conclude yokes for energy consider-offs, differentials and auxiliary products. They can also measure your present areas and offer you with higher high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it offers higher security in unstable terrain. You can buy a U-bolt package to safe the pinion provider to the push shaft. U-bolts also arrive with lock washers and nuts. Efficiency autos and off-highway autos usually use this type of attachment. But ahead of you put in it, you have to make confident the yoke is machined to settle for it.
Finish yokes can be created of aluminum or metal and are made to give toughness. It also offers particular bolt styles for numerous programs. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The organization also creates personalized flanged yokes for a lot of well-known makes. Considering that the company has a comprehensive line of replacement flange yokes, it can help you change your drivetrain from non-serviceable to serviceable.


The initial phase in fixing or replacing an automotive driveshaft is to replace worn or ruined bushings. These bushings are located inside the push shaft to supply a easy, protected trip. The shaft rotates in a rubber sleeve. If a bushing requirements to be changed, you must first verify the guide for recommendations. Some of these elements might also want to be replaced, these kinds of as the clutch or swingarm.

China Standard Electric Golf Cart, Low CZPT Consumption Sightseeing Car, Small Volume, Flexible Operation, Comfortable and Beautiful High Sensitivity Small Car     with Good qualityChina Standard Electric Golf Cart, Low CZPT Consumption Sightseeing Car, Small Volume, Flexible Operation, Comfortable and Beautiful High Sensitivity Small Car     with Good quality